Help

Moderator: Moderators

Help

Postby yfz450man » Tue Sep 15, 2020 7:59 pm

So I’m switching from an auto to a sag 4speed the pedal set is without the pulley So I believe it’s from a newer model but it has a 4 prong plug on it does anyone know what wires go to that ???
I tried posting a pic but it says it’s invalid
Thank y’all
yfz450man
 
Posts: 34
Joined: Mon Nov 12, 2007 1:27 am


Re: Help

Postby cjbiagi » Tue Sep 15, 2020 8:36 pm

It's probably the clutch pedal safety switch. The pedal needs to be depressed to engage the starter.
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 8414
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: Help

Postby yfz450man » Tue Sep 15, 2020 9:18 pm

Thanks Clyde ! I assumed that much but only thing that has me puzzled is where and what plugs into that I’m thinking the 2 purple wires that came off the auto shifter but there’s 4 spades on that clutch switch
yfz450man
 
Posts: 34
Joined: Mon Nov 12, 2007 1:27 am

Re: Help

Postby jim327monza » Wed Sep 16, 2020 3:09 am

2 spades for normal open, 2 for normal close. use the NO spades so that when you depress the clutch pedal it completes the start circuit.
Jim H
jim327monza
 
Posts: 120
Joined: Wed Sep 05, 2012 8:42 pm


Return to Transmission and Driveline Tech

Who is online

Users browsing this forum: No registered users and 1 guest