The Official H-Body Internet Community
Vega, Monza, Sunbird, Astre, Starfire, Skyhawk
Axle backing plate spacers?
Moderator: Moderators
2 posts
• Page 1 of 1
Axle backing plate spacers?
by v8astregt » Wed Jul 11, 2007 2:29 am
I'm asking this for a buddy of mine who doesn't have the internet. Anyways, he has a standard GM 12-bolt for his 70 Camaro. He removed the standard drum brakes and discovered that the discs off of the rear of a 98-up Camaro bolt right on. The only thing that needs to be changed is that the caliper mounting bracket needs to be spaced away from the rearend by like 1/8-1/4". Does someone make a spacer for this?
75 Pontiac Astre GT: 406SBC/TH350, roll bar, S10 goodies, down to 11.47 so far, more to come later.
- v8astregt
- Posts: 2789
- Joined: Sun Jun 25, 2006 4:13 pm
- Location: Gilbert, AZ
by ColinOpseth » Wed Jul 11, 2007 2:39 am
No, but I'm very interested because I have a 12 bolt in my Vega!
'72 Vega with '93 Camaro LT1/M29 T56/12 bolt 3.31. 16" IROCs all around. Sanderson headers into duals with an H-pipe and Flowmasters. It's loud but at least it's faster than your grandma's Buick. pwned.
-
ColinOpseth - Posts: 2887
- Joined: Mon May 22, 2006 9:33 pm
- Location: Victorville, CA
1972 Chevrolet Vega GT
2 posts
• Page 1 of 1
Return to Transmission and Driveline Tech
Who is online
Users browsing this forum: No registered users and 9 guests