Moderator: Moderators
1985 S-10 Axles are about 2 1/2 longer then the Monzas, anyone out there with any answers on the correct axles? My monza is a 2+2 spyder 1978, please post ASAP,, thanks. O by the way my small pin broke off,,, and it took a BFH to remove the big binStonebird wrote:Well if the retaining bolt came out in one piece, I suspect the pin could have a burr around the hole where it goes through. I think BFH is the next step.
robson wrote:1985 S-10 Axles are about 2 1/2 longer then the Monzas, anyone out there with any answers on the correct axles? My monza is a 2+2 spyder 1978, please post ASAP,, thanks.
robson wrote:Thanks Chuck, I had bought (ordered) from Advance Auto parts and I told them at the time I wanted the 2WD axles. I've got to rethink this project and find the correct axles, I have already redrilled the front rotors and they are ready for the road. Any info on where to obtain the correct axles would be appreciated. Thanks again.
Return to Transmission and Driveline Tech
Users browsing this forum: No registered users and 9 guests