by cjbiagi » Thu Dec 06, 2012 10:28 pm
While I had Moser engineering do mine I don't see why you couldn't do them IF you are very careful to maintain concentricity when drilling. The pattern has to be perfectly centered with the center hub to avoid any vibrations. Using a wheel bolt pattern gauge can certainly help. You are basically drilling and tapping 5 holes, the tricky part is the measuring to get them positioned exactly where you want them. If you screw up you are pretty much screwed
You do not have the required permissions to view the files attached to this post.
Clyde.........75 Monza 2+2