axle bearing help please

[utah vega]

My car has a 12 bolt rear end in it but seems to have ford 9 inch bearings and carriers welded on the end of the 12 bolt housings. Well one of the bearings was leaking pretty good so I want to replace it but not sure on the bearing... most the bearings I see for the 9 inch are a rw508ed or something and the bearing that came off my axle is a rw507e so I'm a little confused! Do I try to track down a 507 and a ring to press on there or just get a kit with a 508 and the ring? That is guys

[Smiley]

http://currieenterprises2.reachlocal.net/cestore/categoriesre.aspx?id=965
http://www.moserengineering.com/other-parts/bearings.html

Currie or Moser should have them with the oring, grooved bearing and the ring, you should be able to match it by the inner and outer dia.

[cosvega76]

That's what I have in my Vega. My axle came from Strange Engineering, which is where I bought replacement bearings. Currie and Moser can supply bearings, also.

Chuck

[rtm]

http://www.google.com/imgres?imgurl=htt ... Q&dur=2291

not pictured here (and kinda rare) are impala ends, which I have on my 12 bolt.

hope this helps

[utah vega]

Looks like the small ford bearings were right and got them ordered, thanks guys