best fitting auto shifter for th350

Moderator: Moderators

best fitting auto shifter for th350

Postby paranoid56 » Fri Feb 20, 2015 1:03 am

so i picked up what i thought was a good auto shiftier and i just dont see how its going to fit very well. what are people using? any recommendations?

this is what i have, it just seems to be tall and super long.
Image
paranoid56
 
Posts: 80
Joined: Sat Jul 13, 2013 11:47 pm


Re: best fitting auto shifter for th350

Postby nutt » Fri Feb 20, 2015 1:12 am

With a little fab work, it should fit. There's plenty of room between the tunnel and the top of the trans, at least where the shifter would mount. I recessed a B&M Megashifter all the way to the top of that ugly plastic housing, basically about 4 inches into the tunnel. It looks much better that way and doesn't look like an after-thought.
nutt
 
Posts: 228
Joined: Fri Aug 23, 2013 1:52 am
Location: Portland Oregon

Re: best fitting auto shifter for th350

Postby Smiley » Fri Feb 20, 2015 3:11 am

The B&M pro stick or Hurst quarter stick are small if you like that type of shifter.

Image

B&M Hammer is shorter than most rachet shifters.

Image
User avatar
Smiley
 
Posts: 1002
Joined: Tue Jul 17, 2012 2:50 am

Re: best fitting auto shifter for th350

Postby Fastmax32168 » Fri Feb 20, 2015 6:40 am

The hurst pro matic 2 arches back at the top and clears the dash well.
Roy
80 Monza Cabriolet coupe
94 Corvette Convertible LT-1 500+ HP
Trailblazer EXT LS6 powered
1991 K1500 6.0 LS swapped
Fastmax32168
 
Posts: 945
Joined: Mon Jun 26, 2006 7:56 am
Location: Port Orange Fl

1977 Chevrolet Monza Mirage

Re: best fitting auto shifter for th350

Postby cosvega76 » Fri Feb 20, 2015 10:06 am

I have a factory Monza console with an OE shifter that I had a plate made to make it a gate-type shifter. I can send you a photo if you're interested.


Chuck
cosvega76
 
Posts: 2739
Joined: Mon Jul 03, 2006 8:36 am
Location: Moscow Mills, MO

1973 Chevrolet Vega GT

Re: best fitting auto shifter for th350

Postby MonzaRacer » Sun Jan 17, 2016 9:18 pm

Hurst Pistol grip Quarter stick
MonzaRacer
 
Posts: 170
Joined: Mon Oct 30, 2006 8:38 am
Location: Burns City Indiana

Re: best fitting auto shifter for th350

Postby Fastmax32168 » Mon Jan 18, 2016 7:58 am

Hey Chuck I would like to see that pic. Fastermax@att.net
Thanks
Roy
80 Monza Cabriolet coupe
94 Corvette Convertible LT-1 500+ HP
Trailblazer EXT LS6 powered
1991 K1500 6.0 LS swapped
Fastmax32168
 
Posts: 945
Joined: Mon Jun 26, 2006 7:56 am
Location: Port Orange Fl

1977 Chevrolet Monza Mirage

Re: best fitting auto shifter for th350

Postby cosvega76 » Mon Jan 18, 2016 9:30 am

Roy,

I have some on my home computer, I'll try to get them to you tonight.


Chuck
cosvega76
 
Posts: 2739
Joined: Mon Jul 03, 2006 8:36 am
Location: Moscow Mills, MO

1973 Chevrolet Vega GT


Return to Transmission and Driveline Tech

Who is online

Users browsing this forum: No registered users and 2 guests

cron