Page 1 of 1
best fitting auto shifter for th350
Posted:
Fri Feb 20, 2015 1:03 am
by paranoid56
so i picked up what i thought was a good auto shiftier and i just dont see how its going to fit very well. what are people using? any recommendations?
this is what i have, it just seems to be tall and super long.
Re: best fitting auto shifter for th350
Posted:
Fri Feb 20, 2015 1:12 am
by nutt
With a little fab work, it should fit. There's plenty of room between the tunnel and the top of the trans, at least where the shifter would mount. I recessed a B&M Megashifter all the way to the top of that ugly plastic housing, basically about 4 inches into the tunnel. It looks much better that way and doesn't look like an after-thought.
Re: best fitting auto shifter for th350
Posted:
Fri Feb 20, 2015 3:11 am
by Smiley
The B&M pro stick or Hurst quarter stick are small if you like that type of shifter.
B&M Hammer is shorter than most rachet shifters.
Re: best fitting auto shifter for th350
Posted:
Fri Feb 20, 2015 6:40 am
by Fastmax32168
The hurst pro matic 2 arches back at the top and clears the dash well.
Roy
Re: best fitting auto shifter for th350
Posted:
Fri Feb 20, 2015 10:06 am
by cosvega76
I have a factory Monza console with an OE shifter that I had a plate made to make it a gate-type shifter. I can send you a photo if you're interested.
Chuck
Re: best fitting auto shifter for th350
Posted:
Sun Jan 17, 2016 9:18 pm
by MonzaRacer
Hurst Pistol grip Quarter stick
Re: best fitting auto shifter for th350
Posted:
Mon Jan 18, 2016 7:58 am
by Fastmax32168
Hey Chuck I would like to see that pic.
Fastermax@att.netThanks
Roy
Re: best fitting auto shifter for th350
Posted:
Mon Jan 18, 2016 9:30 am
by cosvega76
Roy,
I have some on my home computer, I'll try to get them to you tonight.
Chuck