Page 1 of 1
Torque arm length
Posted:
Thu Jun 25, 2015 7:28 amby 6475vegaChevy
I am in the putting a 9'' in my 75 Vega GT,it currently has the factory 4 link,which I would like to change to a torque arm,i have seen different lengths from (stock 39 3/4 to 46 1/2 ) depending on drivetrain (I am using a 350 crate -Turbo 400) what length will work best (plan on building my own) any set up information is appreciated.
Keith
Re: Torque arm length
Posted:
Thu Jun 25, 2015 3:25 pmby spencerforhire
You will probably want one of the shorter ones, but you will have to fabricate a front mount for it, as there is no tailshaft for a TH400 that has the mounting holes for the torque arm. I suggest mounting it to the crossmember instead of the trans anyway.
Re: Torque arm length
Posted:
Sat Jun 27, 2015 10:25 pmby 6475vegaChevy
Thanks for your help Spencer ! Keith