turbo 350 gpm

Moderator: Moderators

turbo 350 gpm

Postby rtm » Thu May 05, 2016 5:50 pm

hey guyz,
long time no post.
back on project towne coupe, wondering about flow rate of a turbo 350 trans.
installing check valves that flow 2GPM, 1PSI cracking pressure (one on each line, intake, return ).
is that a restriction?
check valves are 3/8", lines are 5/16"? (whatever stock line is).
running rear mounted trans cooler w/elec. fan.
having trouble w/ trans pan leakage (cooler is higher than trans pan)
let the games begin LOL.

RICK THE (semi-retired) MASON :lol:
Posts: 1101
Joined: Thu Jan 31, 2008 9:06 pm
Location: new hartford conn.

1976 Chevrolet Monza Towne Coupe

Re: turbo 350 gpm

Postby Smiley » Thu May 05, 2016 6:22 pm

The torque converter will drain back into the pan also so you really need to address the leakage at the pan gasket, dipstick and passing gear cable areas. RTV or a molded rubber gaskets are better than cork type and a cast aluminum pan properly torqued.
User avatar
Posts: 728
Joined: Tue Jul 17, 2012 2:50 am

Return to Transmission and Driveline Tech

Who is online

Users browsing this forum: No registered users and 1 guest