TH350 Kick Down Cable Delete
Posted: Sun Apr 02, 2017 10:40 pm
Developed a detent cable delete plug for my new TH350 since I don't have a bracket up by the carb and have a ratchet type shifter.There really isn't too many actual 'plugs' out there for this and many are looking for a solution.Some are tapping the hole for 7/16 plug and others are pounding in a 7/16 frost plug into the hole.Both of these are hard to do with the trans in the car and also require the pan to come off to remove the cable pull wire.My search led me to this detent cable repair kit
Could not match the thread size of the repair ferrule for a screw on cap so used a quart bottle oil cap that has a leak proof membrane inside and cut the cap to fit the inside of the ferrule cap
worked it into the cap with a nice snug fit
Installed without removing the pan or lever wire.This can be removed and replaced with the detent kick down cable if desired at a later time.Filled her up with no leaks.
Could not match the thread size of the repair ferrule for a screw on cap so used a quart bottle oil cap that has a leak proof membrane inside and cut the cap to fit the inside of the ferrule cap
worked it into the cap with a nice snug fit
Installed without removing the pan or lever wire.This can be removed and replaced with the detent kick down cable if desired at a later time.Filled her up with no leaks.