Page 1 of 1

Correct bearing for Pinion on stock 7.5"

PostPosted: Thu Sep 07, 2017 11:49 pm
by kenimpzoom
What is the correct part number for the inner (gear side) bearing for an unmodified case and unmodified pinion on a 76 Chevy Monza with a 7.5"

I have seen some call for a HM88649A and some say HM88649 bearing. Which is correct?

This is what I have so far:
Pinion bearing, gear side HM88649A or HM88649
Pinion bearing race, gear side HM88610
Pinion bearing, yoke side M86649
Pinion bearing race, yoke side M86610
Pinion seal Timken 8610

Thanks, Ken

Re: Correct bearing for Pinion on stock 7.5"

PostPosted: Fri Sep 08, 2017 12:19 am
by monzaaddict

Re: Correct bearing for Pinion on stock 7.5"

PostPosted: Fri Sep 08, 2017 7:24 pm
by kenimpzoom
After reading on this message board, I now have this list.

Pinion bearing, gear side HM88649 or HM88649A
Pinion bearing race, gear side HM88610 or HM88610A
Pinion bearing, yoke side M86649 or M86649A
Pinion bearing race, yoke side M86610 or M86610CJ

Ken