picture of a 77 monza clutch spring

Moderator: Moderators

picture of a 77 monza clutch spring

Postby scotta65 » Mon Feb 26, 2018 7:55 pm

I’m looking for a picture of the cable mounting at the transmission end Of cable. I changed over to four speed
scotta65
 
Posts: 12
Joined: Wed Dec 07, 2016 10:34 pm


Re: picture of a 77 monza clutch spring

Postby monzaaddict » Mon Feb 26, 2018 9:33 pm

one end hooks into hole at end of fork. other end hooks into tab on cross member.
monzaaddict
 
Posts: 2226
Joined: Sun Jul 02, 2006 3:04 pm

Re: picture of a 77 monza clutch spring

Postby scotta65 » Mon Feb 26, 2018 10:18 pm

Thanks. I got these parts used and I think I’m missing something where the cable goes into the bell housing
scotta65
 
Posts: 12
Joined: Wed Dec 07, 2016 10:34 pm

Re: picture of a 77 monza clutch spring

Postby monzaaddict » Tue Feb 27, 2018 7:26 pm

there is a cover with a grommet that has a slice in it that the spring goes through. give me a day or too i will find a picture for you.
monzaaddict
 
Posts: 2226
Joined: Sun Jul 02, 2006 3:04 pm

Re: picture of a 77 monza clutch spring

Postby scotta65 » Tue Feb 27, 2018 8:34 pm

Thanks, that would be great. Looks like it would have to be a long spring. Also where the cable goes into the bell housing it seems like the hole is a lot larger than the cable end, that’s why I would like to see a picture if anybody has one
scotta65
 
Posts: 12
Joined: Wed Dec 07, 2016 10:34 pm

Re: picture of a 77 monza clutch spring

Postby scotta65 » Sun Mar 04, 2018 5:48 pm

No one has a standard shift monza that can show a picture
scotta65
 
Posts: 12
Joined: Wed Dec 07, 2016 10:34 pm

Re: picture of a 77 monza clutch spring

Postby mikebrow74 » Thu May 03, 2018 12:35 am

This is a 1978 Monza Spyder 2+2 Hatchback, 231 V6 and a 4-speed.

Hope this helps
Attachments
78 Monza Clutch Spring.JPG
78 Monza Clutch Spring.JPG (111.56 KiB) Viewed 272 times
mikebrow74
 
Posts: 97
Joined: Fri Aug 04, 2017 11:06 pm
Location: Elk Grove, CA

Re: picture of a 77 monza clutch spring

Postby cjbiagi » Thu May 03, 2018 8:38 am

The end of the cable attaches to a barrel nut. That gives you the adjustment to take the slack out of the cable. You need to have the slack taken up before adjusting the throwout bearing clearance (clutch pedal freeplay) at the ballstud on the top right side of the bellhousing.
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 8209
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza


Return to Transmission and Driveline Tech

Who is online

Users browsing this forum: No registered users and 1 guest