EGR valve V6 3.8L 1980 id

Moderator: Moderators

EGR valve V6 3.8L 1980 id

Postby zzip » Thu Jul 24, 2014 5:47 pm

Hoy,
I hope i'm in the right place here .

I need an identification of my EGR valve please .
1980 V6 3.8L automatic .

The code on the valve is :
Rochester Products
ADJ 17062727
27783

My question is,
Is it a
Positive Back Pressure, Negative Back Pressure or a Ported Signal Vacuum EGR Valve ?


Image


Image


Image

Grtz

Peter from Antwerp
1988 Monza L4 2.5L
1989 Monza Spyder L4 2.5L
1990 Monza Spyder V6 3.2L
1991 Monza Spyder V6 3.8L
2013 Monza V6 3.8L
2014 Starfire V6 3.8L
User avatar
zzip
 
Posts: 306
Joined: Thu Oct 24, 2013 11:52 am
Location: Belgium

1980 Chevrolet Monza 2+2


Re: EGR valve V6 3.8L 1980 id

Postby starfire » Tue Nov 11, 2014 7:20 pm

Peter,

I don't know for sure, but I have a replacement EGR that I bought that is wrong for my car, but the Orifice Washer Selection Chart that came with it says it is correct for your car. (17062727 takes washer 36, the valve came with a bag full of washers). The instruction sheet also says "NOTE: GM valves are marked with a "P" or "N" indicating the type of transducer incorporated". It doesn't say where this mark is, and I cannot find an "N" or "P" on my EGR so I can't help you there. Maybe you could lightly wire brush the top of your valve and reveal the mark. The sheet also says the negative backpressure valve can be replaced with a positive backpressure style replacement valve.

The replacement one I have (NAPA Echlin brand) looks exactly like yours where it attaches to the intake, except for yours has an "outie" (like the one on my car) and this has a "innie".
Alan

1968 Oldsmobile Cutlass S Convertible
1978 Oldsmobile Starfire Firenza

"Starfire, the Oldsmobile you didn't expect"
User avatar
starfire
 
Posts: 679
Joined: Sun Sep 17, 2006 9:03 pm
Location: Southeast Michigan

1978 Oldsmobile Starfire Firenza

Re: EGR valve V6 3.8L 1980 id

Postby zzip » Sun Dec 14, 2014 6:36 pm

Thanks for the info .

Peter from Antwerp
1988 Monza L4 2.5L
1989 Monza Spyder L4 2.5L
1990 Monza Spyder V6 3.2L
1991 Monza Spyder V6 3.8L
2013 Monza V6 3.8L
2014 Starfire V6 3.8L
User avatar
zzip
 
Posts: 306
Joined: Thu Oct 24, 2013 11:52 am
Location: Belgium

1980 Chevrolet Monza 2+2


Return to Carb/Intake/EFI Induction Tech

Who is online

Users browsing this forum: No registered users and 3 guests

cron