NEW VERSION Rearend Swap Brackets

Anything H-body related, but please use one of the topic-specific forums below if appropriate

Moderator: Moderators

NEW VERSION Rearend Swap Brackets

Postby Monzamouse » Tue Feb 14, 2017 12:04 am

I have designed a new upper control arm bracket that
is adjustable for 3 positions. It has the stock position
plus a 2 inch above stock position and a 3 inch above
stock position. The bolt holes are drilled for stock 7/16
bolts so you can use your stock control arms.
These points were picked because of
information in an article that Smiley sent me a while
back for wheel hop. I can’t guarantee this will work
but the article suggests it will due to instant center change.
So it will be Smiley’s fault if it doesn’t work LOL.
I have posted in the for sale section for pricing and few
more pictures.

Thanks
Larry Ray
You do not have the required permissions to view the files attached to this post.
User avatar
Monzamouse
 
Posts: 77
Joined: Fri Jun 30, 2006 12:54 pm
Location: Houston, Texas area

1976 Chevrolet Monza 2+2


Re: NEW VERSION Rearend Swap Brackets

Postby Smiley » Tue Feb 14, 2017 1:06 am

:th: awesome job !
User avatar
Smiley
 
Posts: 1002
Joined: Tue Jul 17, 2012 2:50 am

Re: NEW VERSION Rearend Swap Brackets

Postby Green Weenie » Tue Feb 14, 2017 9:50 am

Would you happen to know what the width is from axle face to axle face on monza rearend. Axle face where the rim bolts up. Don't know what else to call it. Thanks.
Green Weenie
 
Posts: 7
Joined: Fri Dec 02, 2016 7:04 am

Re: NEW VERSION Rearend Swap Brackets

Postby Monzamouse » Tue Feb 14, 2017 4:42 pm

Does this help.
You do not have the required permissions to view the files attached to this post.
User avatar
Monzamouse
 
Posts: 77
Joined: Fri Jun 30, 2006 12:54 pm
Location: Houston, Texas area

1976 Chevrolet Monza 2+2

Re: NEW VERSION Rearend Swap Brackets

Postby Green Weenie » Tue Feb 14, 2017 4:56 pm

Perfect, Thanks.
Green Weenie
 
Posts: 7
Joined: Fri Dec 02, 2016 7:04 am

Re: NEW VERSION Rearend Swap Brackets

Postby Drpepper454 » Mon Mar 26, 2018 7:19 am

How much is the rear end bracket kit and how do you order it
Drpepper454
 
Posts: 2
Joined: Sun Mar 25, 2018 5:34 pm

Re: NEW VERSION Rearend Swap Brackets

Postby Monzamouse » Mon Mar 26, 2018 9:58 am

PM sent.
User avatar
Monzamouse
 
Posts: 77
Joined: Fri Jun 30, 2006 12:54 pm
Location: Houston, Texas area

1976 Chevrolet Monza 2+2

Re: NEW VERSION Rearend Swap Brackets

Postby LSnotchback » Mon Mar 26, 2018 2:32 pm

Awesome, just what I have been looking for :th:
LSnotchback
 
Posts: 25
Joined: Tue Mar 06, 2018 1:23 am

Re: NEW VERSION Rearend Swap Brackets

Postby T-FATTY » Tue Mar 27, 2018 1:21 am

Send pm with ordering info on complete bracket kit. What size axle tube options?
YES I accept paypal donations...
T-FATTY
 
Posts: 752
Joined: Sun Sep 30, 2007 10:46 pm
Location: Somerset, Mass.

Re: NEW VERSION Rearend Swap Brackets

Postby 1971vega » Mon Feb 18, 2019 10:24 pm

Hi Monzamouse I would like to order a set of you new version brackets to help with my install of a 8.5 rear end I sent a pm thanks
1971vega
 
Posts: 2
Joined: Mon Feb 18, 2019 12:15 am

Re: NEW VERSION Rearend Swap Brackets

Postby Smiley » Wed Feb 20, 2019 7:01 am

You will get a faster response if you email him
User avatar
Smiley
 
Posts: 1002
Joined: Tue Jul 17, 2012 2:50 am

Re: NEW VERSION Rearend Swap Brackets

Postby Valdi » Sat Feb 03, 2024 1:52 am

Greetings; I saw your brackets shown on YouTube on Burnouts and Rotorblades. A Vega was being built and he advised to get the brackets from you, in order to do a rearend swap. I saw them here on your forum, but I can't figure out how to get them./ Can you assist me. How do I get to you sales page. This is my first time on the H-Body forum.
Valdi
 
Posts: 1
Joined: Thu Feb 01, 2024 7:22 pm

Re: NEW VERSION Rearend Swap Brackets

Postby Monzamouse » Sat Feb 03, 2024 12:08 pm

Hello Valdi I sent you a PM.
Thanks
Larry 346-208-2088
User avatar
Monzamouse
 
Posts: 77
Joined: Fri Jun 30, 2006 12:54 pm
Location: Houston, Texas area

1976 Chevrolet Monza 2+2

Re: NEW VERSION Rearend Swap Brackets

Postby First vega » Sat Feb 10, 2024 6:52 pm

I would like to purchase a set of brackets how can I reach monza mouse for them
First vega
 
Posts: 1
Joined: Sat Feb 10, 2024 1:08 pm

Re: NEW VERSION Rearend Swap Brackets

Postby Monzamouse » Sun Feb 11, 2024 10:47 am

I got your PM
User avatar
Monzamouse
 
Posts: 77
Joined: Fri Jun 30, 2006 12:54 pm
Location: Houston, Texas area

1976 Chevrolet Monza 2+2


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 6 guests