Can anyone tell me what brand headers?

Moderator: Moderators

Can anyone tell me what brand headers?

Postby gm_fan » Mon Jan 08, 2018 9:15 pm

I have a set of headers which came with a Starfire I bought and they have no id numbers or tags on them. Can anyone tell by looking what they are? The collectors come out on a 45 degree angle..Never seen any like them. The mounts , which I still have , that came with the car are front mounts. It looks like side mounts may work with these , but not sure..thanks Mark
Attachments
20180108_093413.jpg
20180108_093413.jpg (228.38 KiB) Viewed 298 times
20180108_093544.jpg
20180108_093544.jpg (209.82 KiB) Viewed 298 times
20180108_093336.jpg
20180108_093336.jpg (203.03 KiB) Viewed 298 times
User avatar
gm_fan
 
Posts: 147
Joined: Mon Aug 04, 2008 11:58 pm


Re: Can anyone tell me what brand headers?

Postby Smiley » Mon Jan 08, 2018 10:42 pm

Don Hardy
User avatar
Smiley
 
Posts: 747
Joined: Tue Jul 17, 2012 2:50 am

Re: Can anyone tell me what brand headers?

Postby gm_fan » Mon Jan 08, 2018 11:05 pm

will they fit a Monza as well as a Vega? thanks Mark
User avatar
gm_fan
 
Posts: 147
Joined: Mon Aug 04, 2008 11:58 pm

Re: Can anyone tell me what brand headers?

Postby b_pappy » Tue Jan 09, 2018 7:02 pm

I was going to say those look like my Don Hardy headers. They work with their side mount, and I assume they would work with a front motor plate. They exit towards the side for side pipes. We cut mine back some and routed them under the car. You can see a pic in my journal of the routing.
Bruce
b_pappy
 
Posts: 191
Joined: Mon Nov 17, 2014 9:30 pm

Re: Can anyone tell me what brand headers?

Postby monzaaddict » Tue Jan 09, 2018 10:26 pm

bob gumm says he used them with stock side mounts.
http://v8monza.com/
go to faq
then v8 exhaust
monzaaddict
 
Posts: 2176
Joined: Sun Jul 02, 2006 3:04 pm

Re: Can anyone tell me what brand headers?

Postby gm_fan » Tue Jan 09, 2018 10:40 pm

Thanks for the information. l thought they looked like they might work with the side mounts.Only problem is the side mounts I have are welded solid, which does not thrill me very much..One thing I noticed about these headers is where they bolt up to the head, they look taller which would be a good thing using the fast burn gm heads that have the D-port exhaust..thanks again,,Mark
User avatar
gm_fan
 
Posts: 147
Joined: Mon Aug 04, 2008 11:58 pm

Re: Can anyone tell me what brand headers?

Postby Smiley » Wed Jan 10, 2018 1:05 am

V8monza.com and powerbyace.com offer 2 different types of Monza V8 mount replacements if you want some that are not solid.
Image

Image

Image
User avatar
Smiley
 
Posts: 747
Joined: Tue Jul 17, 2012 2:50 am


Return to Engine Tech

Who is online

Users browsing this forum: No registered users and 0 guests