by Monza Harry » Thu Jul 26, 2018 3:30 pm
The turn signal power goes through the connector on top of the steering column. Your symptoms sounds like the switch to me, but you said it was changed by you [bad new ones do happen] and the next thing I would check is to see if a prong from the earlier mentioned connector is pushed back and not making a good connection. This would mimic the switch problems and not be fixed by a new switch, unless you were looking at the right wire while plugging it back in you wouldn't notice that it moved, or if you looked at the terminals and noticed that the one was sitting back [not likely as it would be pulled forward from unplugging]. Harry
I'm not a hoarder I'm a preservationist 78 Monza Spyder (~Soon(ish +/- I guess) To Be 2+2 with Spoilers)