Front upper control arms

[strokerchevyman]

Can you use aftermarket upper tubular control arms and stock lower control arms and get a good wheel alignment out of it

[jim327monza]

The only thing I can tell you is that if you are using the s-10 set up make sure that the arms that you buy have the corrections built in. see more in this section for what adjustments you will need.

[strokerchevyman]

I appreciate your help would these work part number 040-VG-301

[jim327monza]

If you are working on a Vega they should. verify that they come with the correct ball joints for the s-10 spindles. I have not used this set, so double check and make Shure that you can return them if they don't work .

[strokerchevyman]

Thanks so much I appreciate you