T56 Viper 6 Speed Into an H-Body

[h-bot]

From: fordtrknut_REMOVE_394190_THIS_@yahoo.com

Hello, I just signed up to this great Yahoo Group. My brother has a
1977 Chevrolet Monza Spyder. I work as a Cad Draftsman (Autocad
2000) and made an adapter plate at work on the CNC. There have been
alot of modes to the car as we added a homemade frame connecters.
The transmission is from a 1992 Dodge Viper and is brand spanking
new. The reason we picked the Dodge Viper are: First: The stickshift
comes out further forward that the T56's from the Camaro/Firebird.
Second: The Camaro/Firebird gears are a little thinner, and the
output shaft is larger. I know that there will be many questions, and
I hope to make a detailed "How To" soon. If I do it will be in MS
Word....as I know how to use it pretty good. Thanks & Let The
Questions Fly!!! Wayne Grabley (Clifton, New Jersey---USA)

PS....I posted alot of pictures in the PHOTOS section. See a folder
marked "Dels 1977 Monza Spyder". Thanks!!




[This is message #78 by user fordtrknut on Yahoo! Group HBOA Monza Mirage Club: http://groups.yahoo.com/group/hboamonzamirageclub ]

[h-bot]

From: kenneth.mahoy_REMOVE_288327_THIS_@yahoo.com

Wow, I must say I'm impressed. Enjoyed the pics. Am looking forward
to your article on how it was done too. (even though I doubt I'll
ever find a 6spd from a Viper, but it's good info to have "just in
case".)

Also, to be honest with you, the majority of the H-body community is
not located on this forum, as good as it is. The largest forums are
at <a href="http://www.v8monza.com">http://www.v8monza.com</a> in the "V8 Hbody Talk" discussion forum.
Also, the largest Yahoo Groups club can be found at
<a href="http://groups.yahoo.com/group/gmhbody5/">http://groups.yahoo.com/group/gmhbody5/</a>

Would love to see ya there... you seem like you and your brother
could be a wealth of knowledge.

Welcome.

Ken




[This is message #79 by user kenneth.mahoy on Yahoo! Group HBOA Monza Mirage Club: http://groups.yahoo.com/group/hboamonzamirageclub ]